2016 Hyundai Santa Fe recalls and common problems
Safety recalls and owner complaints from NHTSA.
2016 Hyundai Santa Fe recalls
3 safety recalls, newest first.
Feb2022Control unit/modulePark outsideService brakes, hydraulic › Antilock/traction control/electronic limited slip · Campaign #22V056000
- The problem
- Hyundai Motor America (Hyundai) is recalling certain 2016-2018 Santa Fe, 2017-2018 Santa Fe Sport, 2019 Santa Fe XL, and 2014-2015 Tucson vehicles. The Anti-Lock Brake System (ABS) module could malfunction and cause an electrical short, which could result in an engine compartment fire.
- The risk
- An engine compartment fire while parked or driving can increase the risk of injury.
- The fix
- Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS multi-fuse, as necessary, free of charge. Owner notification letters were mailed May 31, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 218.
Jun2017LatchLatches/locks/linkages › Hood · Campaign #17V358000
- The problem
- Hyundai Motor America (Hyundai) is recalling certain 2013-2017 Santa Fe and Santa Fe Sport vehicles. In the affected vehicles, the secondary hood latch actuating cable may corrode and bind, causing the secondary hood latch to remain in the unlatched position when the hood is closed.
- The risk
- If the hood is not securely closed or the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
- The fix
- Hyundai will notify owners, and dealers will replace the secondary latch cable, free of charge. The recall began on August 4, 2017. Owner's may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for the recall is 163.
Mar2016Warning light/devicesSeat belts › Front · Campaign #16V145000
- The problem
- Hyundai Motor America (Hyundai) is recalling certain model year 2016-2017 Santa Fe vehicles manufactured September 1, 2015 to February 12, 2016. In the affected vehicles, the wires in the front seat belt buckle harnesses may be damaged by the seat's height adjuster mechanism, resulting in a failure to provide an audible warning when front seat occupants do not fasten their seat belts. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
- The risk
- Without a warning to remind the front seat occupants that their seat belts are not buckled, they may forget to buckle their seat belt, increasing their risk of injury in the event of a crash.
- The fix
- Hyundai will notify owners, and dealers will inspect and reroute the wires in the front seat belt buckle harnesses to their proper locations, as necessary, free of charge. The recall began on April 27, 2016. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 141.
A recall may cover only some vehicles. Check whether yours has an open recall with its 17-character VIN. Recall repairs are free.
Check my VIN2016 Hyundai Santa Fe common problems
238 complaints filed by owners with NHTSA.
The parts owners report most; 8 reports involve a crash and 2 a fire. These are owners' own reports, not confirmed defects, but they show where problems cluster.
Latest owner reports
Supplement to complaint 11743619. The 3.3L Lambda II GDI engine seized at highway speed on January 16, 2022 (connecting-rod-bearing failure, internal components through the block). The vehicle lost all power and power steering, left the roadway and crashed off-road while the driver tried to bring it to a stop, with four occupants aboard. Hyundai's TXX8 warranty extension covers engine repair or…
Total failure of rear differential / AWD electro-magnetic coupling. I was driving and came to a stop sign, when I went to go it jammed up sending me out of control almost killing me, As I regained control, I got about 20 ft further and hear a HUGE BOOM and my car was again out of my control I was able to slow it down by using the giant dumpster as a bracing point in my parking lot. I got out to…
1. Component/System Failure & Availability: The failed component is the engine's internal Camshaft Variable Valve Timing (CVVT) phaser backing bolt within the 3.3L V6 engine assembly. An internal factory bolt unthreaded, backed out, and physically pierced directly through the upper valve cover. The vehicle and intact failed engine are currently located at an authorized Hyundai dealership service…
WHAT FAILED: The engine â the 3.3L Lambda II GDI V6 (engine family GHYXV03.31XE per the federal emissions label) â failed catastrophically: a connecting rod penetrated the engine block. The failed engine IS available for inspection on request. It has been preserved unrepaired since the failure, the rod penetration of the block is externally visible, and the vehicle is currently at Niagara…
I filed a complaint when the first engine seized. It's a miracle we got off the road safely that day. While it was at the dealership, the engine was replaced with a used engine and covered by my extended warranty from Vroom. I believe the cost was approximately $14,000. I was told the engine had around 30,000 miles on it. I've put around 20,000 miles on this engine and the same thing happened…
Source: NHTSA Office of Defects Investigation. Data downloaded Nov 22, 2026.